How do I save the audio input settings on my X Station?
It is possible to save the audio input settings on the settings on the X Station, they are saved as part of the template. Set the audio inputs up appropriately, then save the template, the input settings (Including the effects) will then be saved with this template.
It the possible to set this template as the default (so it will load when you turn the unit on). This is done by saving the global settings of the unit, with the relevant template selected.
There is no audio coming from input 2.
Input 2 will either be the Jack on the front, or the red Phono on the back of the unit.
The Jack is used to Instrument (e.g. guitar or bass) or Mic level inputs.
The Phono is used for Line...
Altering the input gain of the MIC input
If you are getting too much (or not enough) level through the MiniNova gooseneck microphone, the Input Gain setting can be altered as follows:
1) Hit the MENU button on the left side of the...